Taylor Cabinet Pros
Custom Cabinets in Taylor, TX
Custom cabinets in Taylor, TX — kitchen cabinetry, bathroom vanities, mudroom built-ins, and garage storage. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Taylor and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Custom Cabinets
Custom cabinet makers Taylor TX
Taylor homeowners often assume custom cabinetry means a drive into Austin or Round Rock. It doesn't. Taylor Cabinet Pros builds and installs on-site for Taylor, Granger, and Rockdale. A single pantry or a full kitchen rebuild, we handle both without the city drive.
Central Texas heat and humidity swings aren't kind to cheap stock boxes. We build with plywood and solid wood, not particleboard wrapped in laminate. Want a number? [Contact](/contact) us, or keep reading for the details.
What we do
Custom Cabinets services
Custom Cabinets across Taylor and the surrounding area.
Custom Kitchen Cabinets
Built-to-fit kitchen cabinets with solid wood boxes, custom sizing, and a free estimate for your Taylor-area project.
Learn more →
Custom Kitchen Remodels
Custom kitchen remodels in Taylor, TX, built around new cabinetry and layout changes. Free written estimates.
Learn more →
Built-In Shelving And Wall Units
Built-in shelving and wall units in Taylor, TX, built to match existing trim. Free estimates on custom builds.
Learn more →
Custom Closet Systems
Custom closet systems in Taylor, TX built to fit the space, not a store kit. Free estimates, solid construction.
Learn more →
Home Bar Cabinetry
Custom home bar cabinetry in Taylor, TX, built for storage and durability. Free estimates on bar cabinet builds.
Learn more →
Bathroom Vanity Cabinets
Custom bathroom vanity cabinets in Taylor, TX, built moisture-resistant and sized to fit. Free estimates.
Learn more →
Custom Pantry Cabinets
Custom pantry cabinets in Taylor, TX with adjustable shelving and pull-out storage built for your kitchen. Free estimates.
Learn more →
Entertainment Center Built-Ins
Custom entertainment center built-ins in Taylor, TX matched to your trim. Media storage, free estimates.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Taylor Cabinet Pros
Solid wood and plywood boxes, named plainly
We tell you what's in the box: plywood construction, not particleboard dressed up with a nice door.
Written estimates before anyone cuts wood
You get a scope and a number up front, not a change order halfway through the build.
We travel to Granger and Rockdale
Smaller towns get skipped by bigger Austin shops. Taylor Cabinet Pros builds the route into the schedule.
Built to fit your room, not a catalog size
Every box is measured on-site. No shimming a stock cabinet into a wall that isn't square.
Have a project in mind?
Get a Free EstimateHow it works
How our Custom Cabinets process works
Step 1Initial Consultation
We talk through your needs, style, and budget before anything gets measured.
Step 2Design And Measurement
Our team measures the space on-site and draws up the design for your approval.
Step 3Material Selection
You pick the wood, finish, and hardware for the project.
Step 4Fabrication
Cabinets get built in our shop with real joinery, not staples and glue.
Step 5Finishing
Stain, paint, or sealant goes on last, matched to the look you picked.
Step 6Installation
Installers fit and secure everything on-site, checking alignment as they go.
Ready to start?
Get a Free EstimateCost
Custom Cabinets Taylor TX cost
Pricing depends on wood species, box construction, finish grade, and how much of the room is in scope. Here are ballpark ranges, not a fixed quote. Want a real number? Request a free estimate and we'll measure your space.
| Project type | Typical range | What’s included |
|---|---|---|
| Cabinet refacing | $3,000-$8,000, | new doors and drawer fronts over existing boxes. |
| Single-room cabinets | $5,000-$15,000, | vanity, pantry, or closet system. |
| Full kitchen custom build | $15,000-$35,000, | cabinet boxes, doors, hardware, and install. |
| Whole-home cabinetry | $35,000+ | , kitchen plus built-ins, bar, or office across multiple rooms. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials That Hold Up in Central Texas
Wood and hardware choices matter more here than people think. A wet spring followed by a dry August stresses cabinet boxes and finishes in ways a milder climate never would.
Plywood Panels
The base material in every box we build. It resists the swelling particleboard suffers once humidity climbs.
Solid Hardwood
Picked for grain and durability. Handles seasonal expansion better than engineered stand-ins.
Laminate Surfaces
A budget-friendly finish option in a wide range of colors and textures.
Wood Veneer
Thin wood layers for a clean, consistent look on doors and panels.
Soft-Close Hardware
Hinges and slides that stay quiet and hold up to daily use.
Custom Hardware Finishes
Handles and knobs picked to match the room's overall design.
Questions on materials?
Get a Free EstimateTimeline
How long does a Custom Cabinet take?
Most projects move through the same stages. Smaller builds move faster, full kitchens take longer.
- 01
Consult
same day - 02
Measure and design
1 week - 03
Build
2–4 weeks - 04
Install
1–3 days
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, codes, and compliance
Rules vary by jurisdiction. Verify with Williamson or Milam County before scheduling if you're unsure.
| Typically needs a permit | Often no permit |
|---|---|
| Relocating electrical outlets or lighting for a new layout | Like-for-like cabinet swap in the same footprint |
| Moving plumbing lines for a sink or bar relocation | Refacing doors and drawer fronts |
| Structural wall changes to open up a kitchen | Freestanding or surface-mounted storage units |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a Custom Cabinets pro
| DIY | Hire a pro |
|---|---|
| Swapping hardware or pulls | Full kitchen builds where box squareness affects every door and drawer |
| Adding shelf liners or small organizer kits | Built-ins matching existing trim profiles |
| Minor touch-up staining on existing boxes | Any project moving plumbing or electrical |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Custom Cabinets
Get a free estimate and we'll walk the space with you.
- Boxes are warped or swollen from moisture
- Your layout wastes corner or wall space
- Built-ins from a past renovation don't match the rest of the room
- Particleboard boxes are falling apart at the joints
- You're planning a remodel and don't know where to start
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Taylor and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Hutto · Pflugerville · Round Rock · Thorndale · and others
Outside these locations?
Before & after
See the work up close
Before 
After
Customer feedback
What local customers say
Susan M.
3 weeks ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for custom cabinets. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Taylor, TX
David J.
4 days ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the custom bathroom vanities turned out better than I pictured.
Downtown Taylor, TX
Nancy L.
1 week ago
5 out of 5 starsCalled Taylor Cabinet Pros after a neighbor tip in Taylor. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our custom kitchen cabinets.
Northgate, TX
Common questions
Custom Cabinets FAQs
How much does Custom Cabinets cost in Taylor?
Most projects fall between $2,500 for a small refacing job and $25,000+ for a full custom kitchen. Size, wood species, and finish grade drive the number. A free estimate gets you a real figure for your room.
How long does Custom Cabinets take?
A single room runs 2-4 weeks from consult to install. A full kitchen can stretch to 5-7 weeks once design, build, and install are all factored in.
Do I need a permit for Custom Cabinets?
A like-for-like cabinet swap usually doesn't trigger a permit. Moving plumbing, electrical, or load-bearing walls usually does. Check with Williamson or Milam County before scheduling if you're unsure.
Is DIY Custom Cabinets a good idea?
For a drawer pull swap or shelf liner, sure. For a full kitchen or anything matching existing trim, a few degrees off square shows up everywhere. That's where a pro earns the fee.
When should I call a Custom Cabinets pro?
Call when boxes are warping, the layout wastes space, or you're planning a remodel and don't know where to start. Early calls mean more design options.
What affects Custom Cabinets pricing?
Wood species, box construction (plywood vs. particleboard), finish complexity, hardware grade, and total linear footage are the big levers.
What is typically included in Custom Cabinets?
A standard project includes design, cabinet boxes, doors and drawer fronts, hardware, finish, and installation. Countertops and plumbing work are usually coordinated separately.
How do I prepare my home for Custom Cabinets?
Clear the room, take photos of anything you want matched, and have a rough budget in mind. We handle measuring and design from there.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Taylor.